How to Apply
Clean the wall with sand paper or wire brush to remove the loose particles.
Dampen the surface on which wall putty is to be applied.
Always add water to putty.
Gradually add 1 Part of Clean Water to 3 Parts of Putty Powder (measured by Volume) and mix it to a smooth, workable paste of desired consistency.
Product should be mixed in such a quantity that it can be applied with two hours of mixing.
Putty can be applied using a putty blade or flat trowel.
During application of multiple coats, each coat should be left to dry properly, then the subsequent coat must be applied.
Storage: Always store the putty in dry place and open it just before use.